What to do if my Masimo Medical Equipment says 'No Sensor Connected'?
If the Masimo Medical Equipment shows 'No Sensor Connected', it could be due to a few reasons. First, ensure the O3 Sensor is securely inserted into the O3 Module. If it is, the O3 Sensor itself might be defective, so try replacing it. Alternatively, the O3 Module could be the issue, and replacing it might solve the problem.
Why does my Masimo Medical Equipment say 'Incompatible Sensor'?
If your Masimo Medical Equipment displays an 'Incompatible Sensor' error, there are several potential causes. Begin by confirming that the O3 Sensor is correctly and securely inserted into the O3 Module. Then, check the expiration date of the O3 Sensor to ensure it hasn't passed. If the sensor is properly connected and not expired, it may be defective and need replacement. In some cases, the O3 Module itself may be defective, requiring replacement.
What to do if Masimo Medical Equipment displays 'Defective Sensor'?
If the Masimo Medical Equipment indicates a 'Defective Sensor', the most likely cause is that the O3 Sensor itself is faulty and needs to be replaced.
What to do if Masimo Medical Equipment displays 'Sensor Off Patient'?
If the Masimo Medical Equipment displays 'Sensor Off Patient', it means the O3 Sensor is not correctly placed on the patient. Make sure that the O3 Sensor is properly applied.
How to fix 'Regional Oximeter Disconnected' on Masimo Medical Equipment?
If the Masimo Medical Equipment displays 'Regional Oximeter Disconnected', it means the O3 Module is not connected to the Root. To fix this, plug the O3 Module back into the Root.
General| Brand | Masimo |
|---|---|
| Model | O3 |
| Category | Medical Equipment |
| Language | English |
Detailed description of the 03 Regional Oximeter System, its purpose, and limitations.
Specifies the intended use and patient population for the 03 Regional Oximeter System.
States the conditions under which the 03 Regional Oximeter System should not be used.
Lists critical safety warnings and precautions for operating the 03 Module and system.
Highlights warnings and cautions related to the performance and accuracy of the 03 Module.
Provides warnings and cautions regarding cleaning, maintenance, and service of the 03 Module.
Outlines warnings and cautions related to regulatory compliance, disposal, and usage guidelines.
Provides a general overview of the operating principle of the 03 Regional Oximeter System.
Explains the Beer-Lambert Law and its application in regional oximetry measurements.
Describes the key components that make up the regional oximetry system.
Describes the Root device and its role in displaying parameters and trends.
Details the 03 Module and 03 Sensors, their components, and connection configurations.
Instructions for unpacking and inspecting the 03 System components for shipping damage.
Steps to prepare the 03 System for monitoring, ensuring all components are present and charged.
Guides on how to connect the 03 Module to the Root device using the MOC-9 connector.
Provides instructions on how to connect the 03 Sensor(s) to the activated 03 Module.
Explains the regional oxygenation parameters like rSO2, AUC, Baseline, and Delta Baseline.
Defines Delta SpO2 as the difference between rSO2 and peripheral SpO2.
Details the display of 03 Module parameters and measurements on the Root device.
Describes the available viewing options for the 03 Module window, including Trend View.
Explains how to enable and interpret the Baseline View for rSO2 trends.
Guides on accessing and using the Site Selection Menu to configure sensor locations.
Details how to select sensor sites on the head for monitoring.
Details how to select sensor sites on the body for monitoring.
Explains how to configure parameter display and alarm settings for rSO2, AUC, etc.
Covers settings for the trend display, including Y-axis maximum and minimum values.
Details the configuration options for the AUC Index, including averaging time.
Explains the setting options for Delta Baseline, including alarm limits and silence duration.
Describes the setting option for Delta SpO2, specifically the delta source.
Lists common exception messages that may appear on Root and their indications.
Lists alarm messages that can appear on Root when using the 03 Module.
Provides a guide to troubleshoot common issues with the 03 Module, including possible causes and actions.
Specifies the display ranges and resolution for rSO2, Delta SpO2, and Delta Base.
Details the measurement accuracy for trending and absolute rSO2 values.
Outlines the operating and storage/shipping conditions for the 03 Module.
Lists the physical dimensions and weight of the 03 Module.
Explains the various symbols used on the product hardware and packaging.
Provides safety classifications, compliance information, and manufacturer declarations.
Lists the references and citations used in the manual.
Instructions on how to clean the 03 Module using approved cleaning agents.
Checklist for general maintenance and visual inspection of the 03 Module.
Information regarding serviceability of the 03 Module and warranty voidance.
Details Masimo's policy on warranty repair, service, and returning the 03 Module.
Provides contact information for Masimo Corporation across different regions.
Outlines the terms of the sales and end-user license agreement for the product.
Details the warranty period and terms for the 03 Module.
Lists exclusions from the product warranty coverage.
Grants the license for using the software included with the product.
Specifies restrictions on copying, using, and transferring the software and product.
Clarifies that possession or purchase does not grant an implied license for unauthorized use.
To Next Page
