model no. 046-0265-2 | contact us 1-800-689-9928
OPERATION
Operating the Door
Activate your opener by:
• Pressing the wall console.
• Pressing the assigned button on the remote control.
Depending on the status of the garage door opener and the
position of the garage door, the garage door opener behaves in different ways:
• If the door is closed, activating it will open the door.
• If the door is open, activating it will close the door.
• If the door is closing, activating it will stop the door.
• If the door is opening, activating it will stop the door.
If the door is obstructed:
• While opening, the door will stop.
• While closing, the door will reverse.
• The opener light will flash.
Opener Light
The opener light will turn on:
• When the opener is plugged in (light will turn off automatically after 3 minutes).
• When the opener is activated (light will turn off automatically after 3 minutes).
• When the light button is pressed on the wall console.
You can manually turn on and off the light with the wall console.
Remote Control
To activate the opener with the remote control, hold down the button
until the door begins to move. When the button is pressed, the light
indicator on the remote will flash. For remotes with multiple
buttons, press the button programmed to the desired operation.
Keypad Operation
Single Door Operation: Enter the pin code plus [#].
For example: 1 2 3 4 #.
Multiple Doors Operation: Enter the pin code plus [#] plus [door number].
For example:
Door 1: 1 2 3 4 # 1
Door 2: 1 2 3 4 # 2
Door 3: 1 2 3 4 # 3
Door 4: 1 2 3 4 # 4
To Next Page
Loading...
Need help?
General
