When Add mode is turned on, the counting results of different bundles are
accumulated automatically.
The display shows the current status of the mode, the " " icon lights up
if Add mode is on, and disappears when Add mode is off.
Counting Speed
To adjust the counting speed.
Press the keys Function and Speed (2) to switch the counting speed
between Low/medium/High speeds.
Three different counting speeds are shown sequentially on the middle top
of the LCD display.
900 notes / minutes.
1200 notes / minutes.
1500 notes / minutes.
Batch Counting
To count a preset number of notes from 1 to 999.
Set the batch
Press the Function and BATCH.
Enter a desired quantity by pressing the number keys.
Press the Start to confirm setting and go back to upper layer.
The preset batch is shown on the right top of the LCD display.
Cancel the batch
To Next Page
Loading...
Need help?
General