Result Display Modes and Clearing
The counting result is shown on the display according to the mode selected
below:
To choose a display mode, press the navigation key "○
i
(Info) ", and the
result shows:
Amount and Quantity mode – value of notes counted, and number
of notes counted.
List mode – all details available, value, quantity, and amount of
counted notes, if the 5 rows are not enough, press the navigation key
" (Down)" to display the remaining details.
Amount and Quantity Modes are displayed while running, List Mode
returns to Amount and Quantity mode in process, and requires
pressing navigation key "○
i
" again to display the results.
Press the Function key " C (Clear) " to clear the results, and prepare for
another operation.
To Next Page
Loading...