Press the Function and BATCH to enter batch mode.
Press the Function and BATCH again or press C to clear the present
number.
Press the Start to confirm setting and go back to upper layer.
The preset batch is cancelled
Batch Counting
Counting Mode
Mixed Value / Denomination Detection Counting
Mixed Value mode - Counts mixed denomination of bank notes, and stops when
a suspicious note is detected.
Denomination detection mode - Counts the notes with the denomination of first
real note detected only, and stops when a different value or suspicious note is
detected
Before counting, press the "V (value)" navigation key.
Select "MIX" for mixed face values, "DD" for denomination detection
counting
Depending on the operation settings "Auto / Manual" (see page 11.), start
counting.
To Next Page
Loading...
Need help?
General