Matrix ETERNITY NE - Page 11

Matrix ETERNITY NE Quick Start 5
• Gently seat the GSM/UMTS module on the studs on the mainboard. The connector pins on
the module must make complete contact with those on the mainboard. Do not apply
pressure.
• When the module is seated firmly on the studs on the mainboard, secure the module with the
screws.
• Remove the rubber cap and fix the antenna holder of the Antenna wire onto the Antenna
connector of the enclosure.
Studs for GSM/UMTS
Module on mainboard
Connector Pins for
GSM/UMTS module
on mainboard
Antenna
Holder
Antenna
Wire