Matrix T5X-07 User Manual

36
9.10 DRIVE BELT REPLACEMENT
1) Remove the motor cover as outlined in Section 9.1.
2) Release the drive belt tensioner from drive belt as outlined in Section 9.5.
3) Remove the front roller screw on the drive belt side and loosen the screw on the opposite side (Figure A).
4) Lift the roller and remove the old drive belt (Figure B).
5) After installing a new belt, check it for correct alignment to the motor pulley before setting the tensioner in place.
FIGURE A
FIGURE B
CHAPTER 9: PART REPLACEMENT GUIDE

Matrix T5X-07 Specifications

General

Brand	Matrix
Model	T5X-07
Category	Treadmill
Language	English