26
10.1.3 How to set up the “WIFI” function - continued
4. Console WiFi function test - continued
Step 6: From the home screen on the console, press and hold down the Quick Speed 3 and Quick Elevation 3 keys to go to Service Mode.
Select Asset Management setting is “Enable” (Figure G) and edit Club ID (Figure H). Verify and setup the xID Login setting is “Enable” too
(Figure I). press and hold down the Quick Speed 1 and Quick Elevation 1 keys to go to Manager Mode, verify and setup the Internet setting is
“Enable” (Figure J).
FIGURE HFIGURE G
FIGURE JFIGURE I
CHAPTER 10: SPECIFICATIONS AND ASSEMBLY GUIDE
10.1 WIFI INSTALLATION - CONTINUED