Matrix T5X GROUP TRAINING User Manual

30
10.2 RFID INSTALLATION - CONTINUED
10.2.3 How to set up the “RFID” function
Once the RFID set has been installed, the xID function must be enabled first, then RFID can be used.
1. Enable "xID" function
Step 1: Enter Service Mode.
Step 2: Select “xID Login” (Figure A).
Step 3: Select “Enable” (Figure B).
Step 4: Enter Engineering Mode.
Step 5: Select “DAPI” (Figure C).
Step 6: Select “Server” (Figure D).
Step 7: Select “Production” (Figure E).
FIGURE BFIGURE A
FIGURE DFIGURE C
FIGURE E
CHAPTER 10: SPECIFICATIONS AND ASSEMBLY GUIDE

Matrix T5X GROUP TRAINING Specifications

General

Brand	Matrix
Model	T5X GROUP TRAINING
Category	Music Mixer
Language	English