32
10.2.3 How to set up the “RFID” function (continued)
2. RFID hardware function test in Test mode and home screen - continued
Step 6: Enter Service Mode. Select Asset Management setting “Enable” (Figure G) and edit Club ID (Figure H). Verify the xID Login setting
is set to “Enable” too (Figure I). Enter Manager Mode, verify the Internet setting is set to “Enable” (Figure J).
FIGURE HFIGURE G
FIGURE JFIGURE I
CHAPTER 10: SPECIFICATIONS AND ASSEMBLY GUIDE
10.2 RFID INSTALLATION - CONTINUED
To Next Page
Loading...
