Connecting external devices 25
Connecting DVI-D and RGB display devices
To connect DVI-D or RGB display devices to the multi-format input/output
connector:
1. Connect the KX20 end of the supplied Matrox KX20 to 4 DVI-I cable adapter
to the multi-format input/output connector on the Matrox Orion HD board.
2. Tighten the screws on the sides of the adapter to secure the adapter to the
multi-format input/output connector on the Matrox Orion HD board.
3. Connect your display device(s) to DVI-I connector(s) 1/5 and/or 2/6 of the cable
adapter. To each of these DVI-I connectors, you can attach a DVI-D display device
or an RGB display device.
- To attach a DVI-D display device to DVI-I connector(s) 1/5 and/or 2/6, you
can use a standard DVI cable.
DVI-I connector 4/8
DVI-I connector 3/7
DVI-I connector 2/6
DVI-I connector 1/5
Multi-format
input/output
connector
To Next Page
Loading...
