51
Data Drive (MD,WE#) Default: 6mA
Command (SRAS#,SCA#,SWE#) Default: 16mA
Address Drive (MA,WE#) Default: 16mA
CAS# Drive Default: 8mA
RAS# Drive Default: 16mA
These items allow you to alter the access speeds of the different memory bus
functions. These items are normally optimally determined by the system’s
hardware and chipset, so we recommend that you leave these items at the
manufacturers default.
Memory Parity/ECC Check Default: Disabled
If this item is enabled it allows the system to use parity checking and ECC (Error
Correcting Code) to catch errors in the system memory. Enabling this item might
have an impact on overall system performance.
Integrated Peripherals Option
This option displays a list of items which defines the operation of some
peripheral items on the system’s input/output ports.
OnChip IDE Channel0 Default: Enabled
OnChip IDE Channel1 Default: Enabled
Use these items to enable or disable the Primary and Secondary PCI IDE
channels that are integrated on this mainboard.
To Next Page
Loading...
