60
PCI/VGA Palette Snoop Default: Disabled
This item is designed to overcome some problems that can be caused by some
non-standard VGA cards. This board includes a built-in VGA system that does
not require palette snooping so you must leave this item disabled.
Assign IRQ For VGA Default: Enabled
Assign IRQ For USB Default Enabled
Use these items to assign an IRQ line to the onboard video graphics system and
USB controller.
PCI Health Status Option
On mainboards which support hardware monitoring, this item lets you set
parameters for critical voltages, critical temperatures, and fan speeds.
If this option is active on your system, we recommend that you accept
the default values for these items that are installed by the manufacturer.
The system will alert you whenever the manufacturer’s safe operating
parameters are exceeded.
CPU Warning Temperature Default: Disabled
Shutdown Temperature Default: 60°C/140°F
This item allows you to set the CPU and onboard temperature limit at which point
the system should automatically shutdown the system.
To Next Page
Loading...
