MATSONIC MS7157C - Modem Driver and Software; VIA Folder Installation Notes; ACPI; AGP;AGP33

68
8. Select "C-A+dia PCI Device" and press the "OK" button.
9. Choose proper I/O or the "OK" button for the default setting.
10. Restart the Windows NT system.
To install the audio applications, log on to the NT4 folder, and then log
on to the APPS folder. Run the SETUP program.
Modem Driver and Software
Install the Modem driver from the sub-folders for Windows 95/98 or
Windows NT4.0.
Windows 95/98
The modem is a plug and play device so Windows 95/98 will
automatically detect the presence of your modem. When the Plug and
Play wizard begins to look for modem drivers, click on the button that
says Have Disk and then browse or type in the pathname to the
CMI8x58\modem\win9x folder.
Windows NT 4.0
Follow the instructions in the README file in the WINNT4 sub-folder.
VIA Folder Installation Notes
ACPI
Run the "setup" program from the VIA directory to install the proper ACPI
(Advanced Configuration & Power Interface) drivers for use with the
chipset used in this system.
AGP/AGP33
Run the "setup" program from the VIA directory to install the proper AGP
graphics drivers for the chipset used in this system.
DMATool
Run the Setdma.exe program in this directory to install the bus mastering
Ultra DMA tools for IDE devices.
IRQ
Run the "setup" program from the VIA directory to install the proper PCI
IRQ miniport drivers for the chipset used in this system.