Chapter 4 Preparation for Operation
- 37 -
(2)HD-75～300 type
Step Item
1 Remove adjusting fastener or handle shown in Figure and open cleaning door
to confirm there is no foreign matter inside of it.
Single type Heat retaining type (double)
Picture 41
2-1 In order to keep clean, to take out parts and then clean the hopper inside and
the extracted parts with compressed air or gauze.
(In case of HD-75,100 )
surface
cleaning
Diffuser
Inner and outer
surface cleaning
Lid
Inner sruface
cleaning
the diffuser.
Picture 42
To Next Page
Loading...
