Mattei BLADE 1 - Page 6

1-3
TI015G0013
BLADE 1-2-3
REQUIRED QUALIFICATIONS FOR
OPERATORS
The person in charge of the machine
operation or maintenance should have all
specic professional skills to do this.
The operator should be trained and aware of
his responsibilities.
Below is the description of professional
proles for the machine operators.
Entry Level Machine Operator
(Qualication 1)
Qualied sta able to carry out
simple tasks, i.e. to operate the
machine by using push buttons on
the control panel and carry out
typical simple settings, start-up and
stopping.
Second Level Machine Operator
(Qualication 2)
Qualied sta able to perform the
tasks of Qualication 1 and also to
operate the machine with
disconnected protections to
perform settings, start-up or stopping
functions..
F
NOTA
This qualication includes
responsibilities that normally are
divided into two separate qualications.
For our machine operators a training course
is foreseen, enabling them to perform all
needed actions to operate the machine even
with some of the protections disconnected.
However, this involves a certain competence
by the operator and extreme care by the
factory manager, so that the said operator
performs only allowed operations.
Mechanical Service Engineer
A qualied engineer able to
operate the machine under
normal conditions, to operate it
with disconnected protections, to
work on mechanical parts and make all
needed settings, maintenance and repairs.
He is not allowed to work on electrical
systems with live voltage.
Electrical Service Engineer
A qualied engineer able to operate
the machine under normal
conditions and operate it with
disconnected protections; he is in
charge of all electrical adjustments,
maintenance and repair.
He is able to operate inside cabins and shunt
boxes with live voltage.
Manufacturer’s Engineer
A qualied engineer from
the manufacturer, to
perform complex
operations under special
conditions or according to what is agreed
with the nal user.
General information