- 22 -
CAUTION CODES
Caution Code Caution Contents Countermeasure
When you try to revise the date
beyond the Pay Closing Date,
the unnecessary time data is
deleted.
If you press “SET” key
The unnecessary time data is deleted
and the revised date is set.
If you press “CANCEL” key
The revision is canceled without delet-
ing time data.
When you try to revise Machine
Mode or Pay Closing Date, all
time data is deleted.
If you press “SET” key
All time data is deleted and the revised
Machine Mode or Pay Closing
Date is set.
If you press “CANCEL” key
The revision is canceled without delet-
ing time data.
TROUBLE SHOOTING
CAUTION
Never disassemble the instrument by yourself.
Contact your dealer/distributor if you could not solve the problem after
checking the following table.
Problem Points to Check See
No display Is the power cord connected to the plug socket cor-
rectly?
No print out on time card Is the ink ribbon cassette inserted correctly?
Card insertion obstructed Is the card being inserted with on the correct side?
Is the card bent or damaged?
Deviation in the printing line
position
Is the card being inserted too strongly?
Do you pull out the card during the printing process?
Do you keep holding the card when it is automatically
being pulled inside?
Is the card damp?
Faint printout Is the ink ribbon being used too long?
Is the ink ribbon inserted correctly?
To Next Page
Loading...