- 10 -
SETTING MACHINE NUMBER, MACHINE MODE NUMBER AND
PAY CLOSING DATE (MODE 1)
Operation
A Insert the “Key-Card”. The symbol appears on the display to indicate the setting mode
is on.
B Press the “MODE 1” key. The
symbol appears at “MODE 1” on the display.
C Press the
or key to set or change each item.
D Press the “SET” key after changing each item. The display will move to next item in the or-
der of Machine Number, Machine Mode and Pay Closing Date. When the “SET” key is
pressed at the end, the buzzer beeps twice and the display returns to the start of the setting
mode.
Items (MODE 1) Initial data Setting range Code No.
Machine Number 00 00 to 99 01
Machine Mode
Number
1 1 to 6 02
Pay Closing Date 31 Depends on Machine
Mode Number
03
Operation
1. Setting Machine Mode Number
After setting the “Machine Number”, “Machine Mode Number” is shown on the display. Press
the
or key to select the desired “Machine Mode Number” from the following table.
Pay Period 12/24-Hour Format Machine Mode Number
12H 1
Monthly
24H 2
12H 3
Weekly
24H 4
12H 5
Bi-weekly
24H 6
To Next Page
Loading...
Need help?
General