- 25 -
TROUBLE SHOOTING
CAUTION
Never disassemble the instrument by yourself.
Contact your dealer or distributor if you could not solve the problem after
checking the following table.
Problem Points to Check See
No display Is the power cord connected to the plug socket correctly?
No print out on time card Is the ink ribbon cassette inserted correctly?
Card insertion obstructed
Is the card being inserted on the correct side?
Is the card bent or damaged?
Deviation in the printing
line position
Is the card being inserted too strongly?
Do you pull out the card during the printing process?
Do you keep holding the card when it is automatically being
pulled inside?
Is the card damp?
Faint printout
Is the ink ribbon being used too long?
Is the ink ribbon cassette inserted correctly?
To Next Page
Loading...
