- 9 -
HOW TO SET UP
KEY-CARD
“Key-Card” must be used to set or change any data.
Operation
1. Insert “Key-Card.” symbol appears on the display to
indicate the starting of setting mode.
2. After setting or changing data, insert “Key-Card” again.
symbol disappears.
Keep “Key-Card” in a safe place to prevent it from
being damaged, lost or used by an unauthorized
person.
If you do not touch any keys for 60 seconds,
symbol disappears automatically.
BASIC OPERATION OF SETTING OR CHANGING DATA
Operation
1. Insert “Key-Card.”
2. Press “MODE 1,” “MODE 2,” “MODE 3” or “OPTION” key to select setting mode.
Then first setting item (CODE 01) is displayed.
3. Press “
(BACKWAR)” or “ (FORWARD)” key to select setting item.
4. Press “
(INCREASE)” or “ (DECREASE)” key to change data. (The changeable data
blinks.)
5. If the changed data is OK, press “
(BACKWARD)” or “ (FORWARD)” key to move to
next setting item.
6. Press “SET” key to register all changed data and to return the start of setting mode. Al-
ternatively, you can press “
(FORWARD)” key in last setting item to register all changed
data and to return to the start of setting mode.
By pressing “CANCEL” key during setting, you can return to the start of setting
mode without registration.
To Next Page
Loading...
Need help?
General
