MAINTENANCE 7 - 2
DSE-15www.maxcess.eu MI 1094 1
Wartung.fm
Decommissioning
1. Turn off the electrical power to the system
2. Disconnect the signal cable from the sensor.
only for sensor cables with open wire ends
Personnel: Qualified electrician
The sensor may only be disconnected electrically by a qual-
ified electrician.
3. Unscrew the sensor from its bracket.
4.
Store the sensor in a cool, clean and dry place.
Ambient conditions, page 9-1
OR
Dispose of the sensor according to your national
requirements.
To Next Page
Loading...
Need help?
General
