OPERATION6 - 1
DSE-15 www.maxcess.euMI 1094 1
6 OPERATION
WARNING
Danger of injury by crushing
Do not place your hands on or near moving parts (rollers,
material web, etc.) during operation.
Danger of injury due to cutting on the edge of the material web
Do not place your hands on the edge of the (moving) material
web during operation.
ATTENTION
The sensor could become unusable during the operation by
damages.
Depending on the material of the controlled web, it is
possible a grinding of the material web or a plane change could
strike and damage the sensor or reflector.
Make certain there is sufficient distance between the web and
sensor.
Operation No tasks or settings are required on the sensor during
operation.
For transparent material, the sensor inputs on the web guide
controller must be calibrated to the contrast.
LEDs in normal
operation LEDs H1 and H2
In normal operation the two LEDs H1 and H2 are turned off.
To Next Page
Loading...
Need help?
General
