TROUBLESHOOTING 8 - 2
DSE-15www.maxcess.eu MI 1094 1
Fehlersuche.fm
"n" Fault Remedy
5 Adjustment error – measurement
signal too high
Set up the sensor (again),
Check the mechanical arrangement of the
sensor and reflector. Is there too much
reflected light present?
Setting up the sensor and reflector,
page-5-1
6 Internal setup error The error cannot be corrected by the customer.
Service required or the sensor must be sent to
Fife-Tidland GmbH.
7 General hardware error
To Next Page
Loading...
