Network Address Server Settings (DHCP)
The MA-6060 can act as a DHCP server for LAN and WLAN (WiFI) connected
devices. It can also act as a DHCP forwarder where you are utilizing a central
DHCP server for multiple sites (subnets).
DHCP Type: select DHCP Server or DHCP Forwarder as appropriate
When you select DHCP Forwarder, you will see input fields for the IP address of
the remote DHCP server as below:
DHCP Server: Enable or disable the DHCP server
Start IP Address: The first (lowest) IP address to issue when a DHCP request
comes in ā make sure you exclude the MA-6060 IP address!
Maximum DHCP Users: The maximum number of concurrent DHCP leases.
To Next Page
Loading...
