Maytag MFS Series User Manual

516532 B PUBLICATION DATE 1 JUN 2007.DOC PROGRAMMING MANUAL 21
T EDIT A WASH CYCLE
 Each program step contains a Wash-Rinse part and a Drain-Spin part. (see labels at top of
the screen)
 By the arrow buttons UP and DOWN, without making changes, you can scroll through the
menu items. First the Wash-Rinse menu items are shown and then the Drain-Spin menu
items.
 At the menu item you want to modify, by the arrow buttons LEFT and RIGHT you can adjust
the value.
 When you change the value, the value range is shown in brackets. You can only change
the value within these ranges.
£ Press the ENTER button to save your changes, or the ESCAPE button if you want to keep
the old setting.
) Select Exit or press the ESCAPE button if you want to return to a higher menu level.
) Turn the Service switch back to Run mode when you have finished.
1. Time
- the programmed time of the Wash-Rinse or Drain-Spin sequence.
- the Time to fill the tub with water is not included in the programmed time
of the Wash-Rinse sequence as the filling can be fast or very slow.
- when „time = 0“ is programmed, then the corresponding sequence will
be skipped.
2. Water Temperature in Tub
- at the water fill sequence, the cold and hot water is mixed by the wash
computer to obtain the programmed wash temperature.
3. Water Level
- the wash cycle is programmed with default Water Level settings, Normal
Low and Normal High like as in the water consumption table.(see table 3.4A)
- the water consumption table shows the relation between water level and
water consumption
Program
Number
Step
Number
STEP
Wash Ù S
p
in
p
art
Menu
Item
Value
Menu Item
Original
Value
Limits
Menu Item
Info
action
Position
Menu Item
Spin
Wash
Prog 1
STEP 2
Time: 8.0 Min
8.0 [4.0-20.0]
5

Maytag MFS Series Specifications

General

Brand	Maytag
Model	MFS Series
Category	Washer
Language	English