516532 B PUBLICATION DATE 1 JUN 2007.DOC PROGRAMMING MANUAL 27
When a power interruption occurs while the machine is washing or spinning, after the power
interruption, the wash computer will show a message to restart the interrupted wash cycle.
) PRESS the button of the interrupted wash cycle to restart the cycle.
6.15. CYCLE - STATUS
) At the Main Menu, Select Cycle & Status.
At the Status Menu, you can check the water temperature and water level in the tub and consult
the actual machine states for diagnostic purposes. (press enter button to see the current Status)
By the ARROW UP and DOWN buttons, you can scroll the screens.
Whites
Hot
Minutes
Wash Door
35
Stop
Advance
Status
EXIT
Service Status
To Next Page
Loading...
Need help?
General
