516532 B PUBLICATION DATE 1 JUN 2007.DOC PROGRAMMING MANUAL 7
3.4. PROGRAMMING THE FUNCTIONS
T Limits
To ensure the correct functionality of the washing machine you have to program values within
certain limits.
You can not program a value that is out of the limits range.
T Programming the Water Temperature
Limits (depends sequence : see 6 Standard Wash Tables)
- Minimum value : 34 °F
- Maximum value : 120°F for the PREWASH and 180°F for the WASH sequence.
- For RINSE and FINAL RINSE sequence, no Temperature can be programmed.
T Programming the water level
– Water level Limits
See table 3.4 A and 3.4 B as these values are different for each machine size.
Minimum value : above the temperature sensor
Maximum value : below the overflow outlet
– Normal Low Level, Normal High Level
The Normal Low Level is recommended for the PREWASH and WASH sequences.
The Normal High Level is recommended for the RINSE and FINAL RINSE Sequences.
ATTENTION
!!!
FOR WOOLENS AND OTHER DELICATE LINEN, A NORMAL HIGH WATER LEVEL IS RECOMMENDED.
!
To Next Page
Loading...
Need help?
General
