40 PROGRAMMING MANUAL 516532 B PUBLICATION DATE 1 JUN 2007.DOC
8.5. SERVICE MENU
The Service Menu contains :
Start a Cycle Credit.
The Software Version Number.
An overview of the 20 last failure messages.
Statistics for 9 general Diagnostic messages
Pulley ratio
An overview of the input states
Switching On the Motor Drive for a technical intervention
Reset Cycle Counter and Statistics Diagnostic Messages
T HOW TO GET INTO THE SERVICE MENU
At the Main Menu, Select the Service Menu
Press the ENTER button to make your selection.
Now you will see the Service menu.
• The Software Version number.
(this value can not be selected or changed)
• The owner of the machine has the ability to Start a Cycle Credit
at the service menu (= without payment)
• The Faults Sub-Menu.
Cycle & Status… Service Menu…
Price Menu… Initialization Menu…
Wash Cycle Menu… Configuration Menu…
Main Menu
Software Version: 1.00
Cycle Credit…
Diagnostic Prog. … Toolbox…
Faults…
Exit
Service Menu
Software version : 1.00
Service Menu
Faults...
Service Menu
Cycle Credit…
Service Menu
To Next Page
Loading...
Need help?
General
