516532 B PUBLICATION DATE 1 JUN 2007.DOC PROGRAMMING MANUAL 37
T WHEN SAFETY IS NOT INVOLVED
Full stop + request for continue : a request to Continue ? the program is displayed
Skip + continue : the actual cycle step is skipped and the program continues
with the next step
Continue : the program continues
SPECIAL CASES :
D 1: Defective Water Level sensor
D 2: Defective Temperature sensor
Err 35: Wrong software version
=> the Failure message can only be erased by loading Factory Settings and switching the
power off and back on.
H 63: Initialization fault - inverter
H 64: Verification fault - inverter
=> can be erased by switching off the power.
=> but as H63 and H64 indicates that the frequency inverter is not loaded with the
correct parameter settings, the washing machine can get damaged when the inverter is
functioning with the wrong settings.
Do not use the washing machine before a technician has inspected the problem.
D 3: Service Due
=> A symbol will appear on the display when a Service Due has to be executed.
See Paragraph 8.5 how to reset the cycle counter.
To Next Page
Loading...
Need help?
General
