Maytag Pet Pro - Removing the Shifter; Shifter Removal Steps; Removing the Drain Pump; Drain Pump Removal Steps

FOR SERVICE TECHNICIAN’S USE ONLY
42
Removing the Shifter
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Use cardboard or padding to lay washer on the front cabinet.
4. Remove the two (2) mounting screws and then remove the pulley cover.
5. Remove the harness from the shifter.
6. Remove the two (2) mounting screws as shown in below figure.
7. Lift out the shifter.
Removing the Drain Pump
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Use cardboard or padding to lay washer on the front cabinet.
4. Disconnect hoses to drain pump.
WARNING
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
WARNING
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.