Maytronics Dolphin Plus - Putting the Pool Cleaner into the Pool; Removing the Pool Cleaner from the Pool

Dolphin Plus Pool Cleaner | Operating Instructions
5
EN
EN
Turn the power supply ON.
ON
OFF
5.2. Putting the Pool Cleaner into the pool
5.3. Removing the Pool Cleaner from the pool
The robot will perform automatic shut-off at the end
of the cleaning cycle.
Turn OFF and unplug the power supply.
CAUTION
If Wonder brush/ Wonder rings are dry, soak
them in water until soft.
Shake the robot from side to side or turn it
upside down to release trapped air.
Let it sink to the pool floor.
The Pool Cleaner will now operate until it
has reached the end of the cleaning cycle.