Dolphin Plus Pool Cleaner | Operating Instructions
7
EN
To remove the
kinks, stretch
the cable out
completely and let
it sit for at least a
day in the sun.
If you notice debris
trapped in the
impeller open
the impeller and
remove the debris.
If the pool cleaner will not be in use for an extended
period, perform the following storage steps:
Make sure that no water is left in the pool cleaner
Thoroughly clean the filter bag and insert in place
Roll up the cable so that it has no kinks and place
on the Caddy
Store the pool cleaner in a protected area either
on its Caddy or simply upsidedown
5.5. Off-season storage
Cleaning the impeller
Unplug the power supply.
Cable
To Next Page
Loading...
