Maytronics M600 - Placing the Cleaner in the Pool; Plugging in the Power Supply

6
M600 / ZENIT 60 / ACTIVE X6 / ACTIVE ULTIMATE Robotic Pool Cleaner | User Instructions
5.2 Placing the Robotic Pool Cleaner into the pool
Place the Robotic Pool Cleaner in the pool.
Release it and let it sink to the floor of the pool.
Make sure that the floating cable is free of any obstacles.
5.2.1
Connect the power supply to the AC.
11cm/4 in
minimum
11cm/4 in
minimum
5.3 Plug in the power supply
5.3.1