MECHANICAL
01–10–28
Engine Workshop Manual 13B-MSP (Multi Side Port) (1773–1U–03C)
2. Remove the SST handle.
3. Position the gear of the stationary gear
downward, and install the main bearing using the
SST.
Caution
• Press the main bearing in so that the top
of the main bearing is flush with the top
of the stationary gear flange.
4. Apply thread-locking compound to the stopper
screw and install.
Tightening torque
3.2—4.7 N·m
{33—47 kgf·cm, 29—41 in·lbf}
End Of Sie
49 0813 235
BHJ0110E059
49 0813 235
BHJ0110E060
STOPPER SCREW
CHU0110E042
To Next Page
Loading...