Mazda 3 2020 - Page 220

▼
Headlight High-Low Beam
The headlights switch between high
and low beams by moving the lever
forward or backward.
1. High beam
2. Low beam
When the headlight high-beams are
on, the headlight high-beam indicator
light is turned on.
▼
Flashing the Headlights
The headlights can be flashed with the
ignition switched to ON.
To flash the headlights, pull the lever
fully towards you (the headlight switch
does not need to be on).
1. OFF
2. Headlight flashing
The headlight high-beam indicator
light in the instrument cluster
illuminates simultaneously. The lever
will return to the normal position when
released.
▼
Coming Home Light
The coming home light turns on the
headlights (low beams) when the lever
is operated.
To turn on the lights
When the lever is pulled with the
ignition switched to ACC or OFF, the
low beam headlights turn on.
The headlights turn o after a certain
period of time has elapsed after all of
the doors are closed.
NOTE

The time until the headlights turn o
after all of the doors are closed can
be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.

If no operations are done for 3
minutes after the lever is pulled, the
headlights turn o.

The headlights turn o if the lever is
pulled again while the headlights are
illuminated.
When Driving
Switches and Controls
4-62
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36