Mazda 3 2020 - Page 247

▼
DSC OFF Indicator Light
This indicator light stays on for a few
seconds when the ignition is switched
ON.
It also illuminates when the DSC OFF
switch is pressed and TCS/DSC is
switched o.
Refer to DSC OFF Switch on page
4-89.
If the light remains illuminated and the
TCS/DSC is not switched o, take your
vehicle to an expert repairer (we
recommend an Authorised Mazda
Repairer). The DSC may have a
malfunction.
▼
DSC OFF Switch
Press the DSC OFF switch to turn o
the TCS/DSC. The DSC OFF indicator
light in the instrument cluster and the
DSC OFF switch indicator light will
illuminate.
1. DSC OFF switch indicator light
Press the switch again to turn the
TCS/DSC back on. The DSC OFF
indicator light and the DSC OFF switch
indicator light will turn o.
NOTE

When DSC is on and you attempt to
free the vehicle when it is stuck, or
drive it out of freshly fallen snow, the
TCS (part of the DSC system) will
activate. Depressing the accelerator
will not increase engine power and
freeing the vehicle may be dicult.
When this happens, turn o the
TCS/DSC.

If the TCS/DSC is o when the
engine is turned o, it automatically
activates when the ignition is
switched ON.
When Driving
ABS/TCS/DSC
4-89
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36