CAUTION
When removing the lens or lamp unit
using a flathead screwdriver, make sure
that the flathead screwdriver does not
contact the interior terminal. If the
flathead screwdriver contacts the
terminal, a short circuit may occur.
NOTE
When replacing a bulb, contact an
expert repairer (we recommend an
Authorised Mazda Repairer).
Use the protective cover and carton
for the replacement bulb to dispose
of the old bulb promptly and out of
the reach of children.
For details regarding the installation
positions of the interior lights, refer
to the following:
Vanity mirror lights
Refer to Vanity Mirrors on page
5-33.
Front overhead lights/front map
lights, rear overhead light, and
luggage compartment light
Refer to Interior Lights on page
5-34.
▼
Replacing Exterior Light Bulbs
The exterior lights have either LEDs or
normal bulbs.
Only the bulb for a running lights/
position lights (type B) can be
replaced.
LED type
Headlights
Running lights (Type A)
Position lights (Type A)
Front direction indicator lights
Side direction indicator lights
High-mount brake light
Rear direction indicator lights
Brake lights
Tail lights
Reverse lights
Rear fog lights
Number plate lights
The LED bulb cannot be replaced as a
single unit because it is an integrated
unit.
The LED bulb has to be replaced with
the unit. If a replacement is necessary,
consult an expert repairer (we
recommend an Authorised Mazda
Repairer).
Maintenance and Care
Owner Maintenance
6-48
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36
To Next Page
Loading...
