x
(Automatic transaxle)
The selector lever is in the P (Park), N
(Neutral), or R (Reverse) position.
Under the following conditions, the
MRCC cancel indication is displayed in
the active driving display and a single
beep sound is heard.
x
The DSC has operated.
x
The Smart Brake Support (SBS) has
operated.
x
The Smart City Brake Support
[Forward] (SCBS F) or Advanced Smart
City Brake Support (Advanced SCBS)
has operated.
x
When travelling on a downslope for a
long period of time.
x
There is a problem with the system.
x
The radar sensor (front) cannot detect
target objects (during rain, fog, snow or
other inclement weather conditions, or
when the radiator grille is dirty).
x
The vehicle speed decreases to less than
25 km (16 mph).
x
(Manual transaxle)
x
The shift lever is shifted to neutral (N)
for a certain period of time.
x
The clutch is depressed for a certain
period of time.
x
The engine stalls.
Resuming control
If the MRCC system is cancelled, you can
resume control at the previously set speed
by pressing the RES switch and after all of
the operation conditions have been met.
NOTE
If the set speed is not indicated in the
display, the control does not resume even
if the RES switch is pressed.
Tur n ing off the sy s tem
Press the OFF/CANCEL switch two times
while the MRCC system is operating to
switch off the system.
When Driving
i-ACTIVSENSE
4-148
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52
To Next Page
Loading...
