Mazda CX-3 - Page 341

Turning on the system
CANCEL switch
RES switch
OFF switch
switch
switch
MODE switch
SET- switch
SET+ switch
When the MODE switch is pressed once, the MRCC with Stop & Go function system turns
on, and the MRCC with Stop & Go function main indication (white) turns on and the
vehicle speed and the distance between the vehicles while in headway control can be set.
In addition, the MRCC with Stop & Go function system display indication is displayed on
the active driving display at the same time.
NOTE
x
If the ignition is switched off while the MRCC with Stop & Go function system is
operating, the system will be operable when the ignition is switched ON the next time.
x
(European models)
The MRCC with Stop & Go function can switch to the Adjustable Speed Limiter (ASL).
Refer to Adjustable Speed Limiter (ASL) on page 4-165.
x
(Except European models)
The MRCC with Stop & Go function can switch to the cruise control function.
Refer to Cruise Control Function on page 4-162.
When Driving
i-ACTIVSENSE
4-156
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52