EasyManua.ls Logo

Mazda CX-3 - Page 355

Mazda CX-3
785 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setting the System
WARNING
Always verify the safety of the surrounding
area when setting the ASL:
If the speed is set lower than the current
vehicle speed, the vehicle speed is
decreased to the set speed. Verify the safety
of the surrounding area and keep a safer
distance between vehicles ahead and
behind you.
1. Press the MODE switch to turn the
system on.
2. (With cruise control)
Press the SET/
to set the speed.
When the current vehicle speed is 30
km/h (20 mph) or more, the speed is
set to the current vehicle speed. When
the current vehicle speed is less than
30 km/h (20 mph), the speed is set to
30 km/h (20 mph).
(With Mazda Radar Cruise Control
(MRCC) or Mazda Radar Cruise
Control with Stop & Go function
(MRCC with Stop & Go function))
Press the SET
or SET to set the
speed. When the current vehicle speed
is 30 km/h (20 mph) or more, the
speed is set to the current vehicle
speed. When the current vehicle speed
is less than 30 km/h (20 mph), the
speed is set to 30 km/h (20 mph).
3. (With cruise control)
To increase the set speed, press the
RES/
switch continuously. The set
speed can be adjusted in 10 km/h (5
mph) increments. The set speed can
also be adjusted in about 1 km/h (1
mph) increments by pressing the RES/
switch momentary. For example, the
set speed increases about 4 km/h (4
mph) by pressing the RES/
switch 4
times.
(With Mazda Radar Cruise Control
(MRCC) or Mazda Radar Cruise
Control with Stop & Go function
(MRCC with Stop & Go function))
To increase the set speed, press the
SET
switch continuously. The set
speed can be adjusted in 10 km/h (5
mph) increments. The set speed can
also be adjusted in about 1 km/h (1
mph) increments by pressing the SET
switch momentary. For example, the
set speed increases about 4 km/h (4
mph) by pressing the SET
switch 4
times.
4. (With cruise control)
To decrease the set speed, press the
SET/
switch continuously. The set
speed can be adjusted in 10 km/h (5
mph) increments. The set speed can
also be adjusted in about 1 km/h (1
mph) increments by pressing the SET/
switch momentary. For example, the
set speed decreases about 4 km/h (4
mph) by pressing the SET/
switch 4
times.
When Driving
i-ACTIVSENSE
4-170
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52

Table of Contents

Other manuals for Mazda CX-3

Related product manuals