Mazda CX-3 - Page 632

3. Insert the tape-wrapped flathead
screwdriver into the gap and slide it in
the direction of the arrow.
Cover
Gap
4. Twist the flathead screwdriver in the
direction of the arrow and remove the
cover.
Cover
5. Remove the battery cap, then remove
the battery.
CAUTION
¾Be careful not to allow the rubber
ring shown in the gure to be
scratched or damaged.
¾If the rubber ring detaches, reattach
it before inserting a new battery.
Rubber ring
6. Insert a new battery with the positive
pole facing up, and then cover the
battery with the battery cap.
7. Close the cover.
8. Reinsert the auxiliary key.
Maintenance and Care
Owner Maintenance
6-41
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52