21
Clean Fix Control
Clean Fix is a built in ‘self-clean’ feature
designed to reduce the build up of dirt and
dust in the radiator matrix; on activation of
the its control switch (‘M’) the blades of the
fan change angle diverting air flow back
through the radiator thus removing dirt and
dust particles.
Although Clean Fix operates automatically
at preset periods, the operator control
allows the user to override the function to
perform additional cleaning cycles when
working in dirty or dustier conditions.
Auxiliary Functions
Switches ‘H’ & ‘G’ are reserved for optional
or additional auxiliary functions that may be
required to operate different attachments
and equipment.
S-Key
The address of the remote control unit is stored in the S-Key and
is matched to the machine it was supplied with, therefore the
controls will only communicate with a specific machine; the S-Key
cannot be removed for use in an alternate control unit and will not
operate a different machine.
WARNING! Do not attempt to turn off or stop a machine by removing the
S-Key; only use the correct commands and procedures to stop and switch
off the machine.
Normal fan operation ▲ Clean Fix activated ▲
– air drawn through radiator for cooling – air blown through radiator for cleaning
To Next Page
Loading...
