Heater is Hot
The heater is hot and will burn clothing and skin.
Keep the heater in its insulated heater stand or
blanket when not in use, and use care when
heating the pipe.
NOTICE: Use only a clean non-synthetic cloth such as a cotton
cloth to clean the heater plates.
TX00104-8-12-94
Fusion Equipment Safety
Do Not Tow Fusion Machine at Speeds Greater
than 5 MPH
The chassis is not designed for over-road towing.
Towing at speeds greater than five miles per
hour can result in machine damage as well as
injury. Always transport the machine by flatbed
truck or similar means, and make sure that unit is
properly secured.
TX00101-4-12-93
Fusion Procedures
Obtain a copy of the pipe manufacturer's procedures or
appropriate joining standard for the pipe being fused. Follow the
procedure carefully, and adhere to all specified parameters.
Failure to follow pipe manufacturer's procedure
could result in a bad joint. Always follow pipe
manufacturer's procedures.
TX02984-5-4-09
CD00632-7-25-00
WR00079-1-24-96
WR00030-2-10-93
1 - 4
Periodically Check Temperature
NOTICE: Incorrect heating temperature can result in bad fusion
joints. Check heater plate surface temperature periodically with a
properly calibrated pyrometer, and make necessary adjustments.
The thermometer on heaters indicates internal temperature, and
should be used as a reference only.
TX00107-11-13-95
WR00077-4-16-93
To Next Page
Loading...