Fusion Equipment Safety
Positioning Fusion Machine
Place fusion machine on as level ground as possible, and set the
brake on the rear wheel. If it is necessary to operate machine on
unlevel grade, chock the wheels and block the unit to make it as
stable as possible.
TX00112-9-15-94
WR00076-4-7-93
1 - 5
Transporting 2LC and 2CU Units
On smaller machines it is easiest to carry the unit if the facer is
securely installed and locked on the fusion unit. The facer has a
handle that allows the unit to be firmly grasped and carried.
NOTICE: Do not carry unit by the lever handles because they
can release or bend. Care must be used if the unit is grasped
elsewhere because numerous pinch points exist.
TX00111-4-22-93
WR00081-4-22-93
To Next Page
Loading...