Operation
Read before Operating
Before operating this machine, please read this manual
thoroughly and keep a copy with the machine for future
reference.
The fusion procedures in this manual are for use with the
polyethylene pipe. If fusing other thermoplastic pipe materials,
refer to the pipe manufacturer's suggested procedures or
appropriate joining standard.
TX00838-9-28-09
PH01054-2-20-97
Prepare Heater
Heater Is Not Explosion Proof. Operation of
heater in a hazardous environment without
necessary safety precautions will result in
explosion and death.
If operating in a hazardous environment, heater should be
brought up to temperature in a safe environment, then unplugged
before entering the hazardous atmosphere for fusion.
Install butt fusion heater adapters.
NOTICE: The heater should never be used without butt fusion
heater adapters installed. Refer to the "Maintenance" section of
this manual for installation procedure.
Place heater in insulated heater stand.
Plug heater into a proper power source.
Allow heater to warm-up to operating temperature.
Refer to the "Maintenance" section of this manual for instructions
on how to adjust heater temperature.
TX00366-9-16-94
PH02330-4-29-02
PH02322-4-29-02
3 - 1
To Next Page
Loading...