4 - 2
Maintenance
Fasteners Must Be Tight
Check all nuts, bolts, and snap rings to make certain they are
secure and in place.
TX00437-9-13-94
Clean and Lubricate Bearings
All clamp knobs are equipped with thrust bearings to reduce
friction and improve efficiency of the clamping screw. Keep
these bearings clean by washing in kerosene or solvent. They
should be lubricated with light machine oil. These bearings must
be replaced if they become inoperative.
TX00866-1-30-96
Clean Eyebolt Threads
Keep the clamp knob eyebolt threads brushed clean with a soft
bristle brush. The threads are coated with a black dry lubricant
and do not require oiling.
TX01849-7-25-00
Remove Dirt
Remove dirt from jaw and insert serrations and clamp knob
eyebolts.
TX00865-1-30-96
PH01858-7-25-00
PH01859-7-25-00PH001859-7-25-00
PH01846-7-25-00
To Next Page
Loading...