Introduction
Thank You for purchasing this
McElroy product
The No.2LC (Locking Cam) and PitBull No.14 model
fusion machines are designed to butt fuse polyethylene
pipe as well as tees, ells and other fittings.
If fusing other thermoplastic pipe materials, refer to the
pipe manufacturer's fusion procedures or appropriate
joining standard.
The No.2LC fuses 1/2‰ CTS to 2‰ IPS (20mm to 60mm).
The PitBull No.14 fuses 1‰ IPS through 4‰ DIPS (32mm
through 122mm) A four-wheel cart is also available.
With reasonable care and maintenance, these machines
will give years of satisfactory service.
Before operating this machine, please read this manual
thoroughly, and keep a copy with the machine for future
reference. This manual is to be considered part of your
machine.
World Class Training
This manual is intended as a guide only and does not
take the place of proper training by qualified instructors.
The information in this manual is not all inclusive and
can not encompass all possible situations that can be
encountered during various operations.
McElroy Manufacturing, Inc., offers advanced training
classes to enhance efficiency, productivity, safety and
quality. Training is available at our facility or on-site at
your location. Call (918) 836-8611 or visit our website
for online solutions at www.mcelroy.com.
PH00917-8-15-97
TX01850-7-25-00
TX01083-9-22-09
PH01848-7-25-00
To Next Page
Loading...