2 - 3
Overview
Master Fitting Insert
This is the master insert for a 2" outlet, branch saddles and
certain tapping tees. Required for service saddle inserts.
Service Saddle Insert
The service saddle insert requires the 2" master insert. The insert
is for use with service saddles and multi-saddles.
Pivot Release Master Insert Assembly
There is one for 3" IPS to hold inserts for smaller sizes (included
with sidewinder). Another for 4" outlet, branch saddles
(purchased separately).
PH00847-5-24-96
PH00811-4-22-96PH00812-4-22-96
TX00937-6-21-10
TX00938-6-21-10
TX00939-6-21-10
To Next Page
Loading...
