2 - 4
Overview
Sidewall Inserts
Sidewall inserts are for chain clamp models only. They are used
for 1-1/4" to 8" sizes.
Line Pipe Inserts
Line pipe inserts are for 2" and 3" pipe sizes. 2" inserts are
required for 1-1/4" and 1-1/2" inserts. Line pipe inserts are for
jaw clamp models only.
Line Pipe Bolster
The line pipe bolster is for chain clamp models only. It is installed
on the opposite side of the pipe from the base of the chain
clamp assembly. It is used for 1-1/4" to 8" pipe sizes.
PH00814-4-22-96
PH00815-4-22-96
PH00816-4-22-96
TX00941-6-21-10
TX00942-5-9-96
TX00943-6-21-10
To Next Page
Loading...
