McHale 995 TSR User Manual

McHale 995 L+T Square Bale Wrapper
27
6
Bale & Plastic Film Requirements
6.1 Bale Requirements
The bales to be wrapped should be well shaped, dense and of suitable quality for
making silage. Substandard material will not produce good quality silage regardless of
how well the bale is wrapped.
Square bales
 Cross section: 800-900 mm wide, 600-1,000 mm high
 Length: Up to 1,800 mm long
Round bales
 Bale width: Up to 1,500 mm wide
 Bale height: Diameter up to 1,500 mm high
The roller cradle centres must be set up correctly for the size of the bale being wrapped
to ensure even coverage of plastic film on the bale. (To adjust the roller cradle centres,
see “Table cradle drive chains” on page 64)
Figure 6.a - Roller cradle centres

McHale 995 TSR Specifications

General

Brand	McHale
Model	995 TSR
Category	Stretch Wrapping Systems
Language	English